The content on this page has been converted from PDF to HTML format using an artificial intelligence (AI) tool as part of our ongoing efforts to improve accessibility and usability of our publications. Note:
- No human verification has been conducted of the converted content.
- While we strive for accuracy errors or omissions may exist.
- This content is provided for informational purposes only and should not be relied upon as a definitive or authoritative source.
- For the official and verified version of the publication, refer to the original PDF document.
If you identify any inaccuracies or have concerns about the content, please contact us at [email protected].
TAS 100: Principles for Technical Actuarial Work v1.0
Technical Actuarial Standard 100: Principles for Technical Actuarial Work
The FRC is responsible for promoting high quality corporate governance and reporting to foster investment. We set the UK Corporate Governance and Stewardship Codes as well as UK standards for accounting, auditing and actuarial work. We represent UK interests in international standard-setting. We also monitor and take action to promote the quality of corporate reporting and auditing. We operate independent disciplinary arrangements for accountants and actuaries, and oversee the regulatory activities of the accountancy and actuarial professional bodies.
The FRC does not accept any liability to any party for any loss, damage or costs howsoever arising, whether directly or indirectly, whether in contract, tort or otherwise from any action or decision taken (or not taken) as a result of any person relying on or otherwise using this document or arising from any omission from it.
The Financial Reporting Council Limited 2016 The Financial Reporting Council Limited is a company limited by guarantee. Registered in England number 2486368. Registered Office: 8th Floor, 125 London Wall, London EC2Y 5AS
This standard should be read in conjunction with the Framework for FRC technical actuarial standards. Terms in bold are defined in the Glossary of defined terms used in FRC technical actuarial standards.
Purpose
Technical Actuarial Standard 100: Principles for Technical Actuarial Work (TAS 100) promotes high quality technical actuarial work. It supports the Reliability Objective that "users for whom actuarial information is created should be able to place a high degree of reliance on that information's relevance, transparency of assumptions, completeness and comprehensibility, including the communication of any uncertainty inherent in the information".
Scope of application
TAS 100 is applicable to all technical actuarial work within the geographic scope of FRC technical actuarial standards1.
Technical actuarial work is work performed for a user:
- where the use of principles and/or techniques of actuarial science is central to the work and which involves the exercise of judgement; or
- which the user may reasonably regard as technical actuarial work by virtue of the manner of its presentation.
Technical actuarial work is not limited to work undertaken by an actuary.
Compliance
Members of the Institute and Faculty of Actuaries (IFoA) are required to comply with TAS 100. Wider adoption is encouraged. Other professional bodies, relevant regulators and contracting parties may require entities and individuals who are not members of the IFoA to comply with TAS 100.
Judgements concerning the application of this standard shall be exercised in a reasoned and justifiable manner.
Each of the principles and provisions in TAS 100 shall be followed where they are relevant to the work.
Departures from the provisions concerning communications to users are permitted if they are unlikely to have a material effect on the decisions of users.
Nothing in TAS 100 should be interpreted as requiring work to be performed that is not proportionate to the nature, scale and complexity of the decision or assignment to which the work relates and the benefit that users would be expected to obtain from the work.
Communications for reserved work, work in the scope of a Specific TAS and technical actuarial work which is central to a significant decision by the user shall include a statement confirming compliance with TAS 100.
Commencement date
This standard applies to technical actuarial work which is completed on or after 1 July 2017.
The Principles
Judgement
1Judgement shall be exercised in a reasoned and justifiable manner; material judgements shall be communicated to users so that they are able to make informed decisions understanding the matters relevant to the actuarial information.
Data
2Data used in technical actuarial work shall be appropriate for the purpose of that work so that users can rely on the resulting actuarial information.
Provisions
2.1Data shall be relevant for the purpose of the technical actuarial work.
2.2If data is insufficient or unreliable it shall be improved by adjusting or supplementing it to the extent that is proportionate.
2.3Data used in technical actuarial work, the checks and controls that have been applied to that data and any actions taken to improve insufficient or unreliable data shall be documented.
2.4Communications shall describe the data used in the technical actuarial work, the source of the data, the rationale for the selection of the data, whether checks and controls have been applied, any material uncertainty in the data, and the approach taken to deal with that uncertainty.
2.5Communications shall state any limitations in the actuarial information resulting from the use of insufficient or unreliable data and provide an indication of their impact on the actuarial information.
Assumptions
3Assumptions used, or proposed for use, in technical actuarial work shall be appropriate for the purpose of that work so that users can rely on the resulting actuarial information.
Provisions
3.1Unless set by the user, a third party or by regulation, assumptions used in technical actuarial work, shall be consistent with each other and shall be derived from as much relevant information as is sufficient or, if there is insufficient relevant information, as is available.
3.2Assumptions used in technical actuarial work shall be documented.
3.3Communications shall state the material assumptions and describe their rationale.
3.4Communications shall include a comparison of the assumptions with those used in the previous exercise carried out for the same purpose (if one exists) with an explanation of any differences, and description of any change in the rationale underlying the assumptions used.
3.5Communications shall state when assumptions are set by a user, a third party or by regulation. Communications shall state whether any assumptions set by a user or a third party are not reasonable for the purpose of the technical actuarial work and provide an indication of their impact on the actuarial information.
Models
4Models used in technical actuarial work shall be fit for the purpose for which they are used and be subject to sufficient controls and testing so that users can rely on the resulting actuarial information.
Provisions
4.1An explanation of how a model is fit for the purpose for which it is used and what it does shall be documented.
4.2Controls and tests that have been applied to a model shall be documented.
4.3Communications shall explain the methods and measures used in the technical actuarial work and describe their rationale.
4.4Communications shall include an explanation of any changes to the methods and measures used from the previous exercise carried out for the same purpose (if one exists).
4.5Communications shall include explanations of any significant limitations of the models used and the implications of those limitations.
Communications
5Communications shall be clear, comprehensive and comprehensible so that users are able to make informed decisions understanding the matters relevant to the actuarial information.
Provisions
5.1Communications shall state its users, the scope and purpose of the technical actuarial work and who commissioned the work. Each component communication shall state its purpose and to whom it is addressed.
5.2The style, structure and content of communications shall be suited to the skills, understanding and levels of relevant technical knowledge of their users.
5.3Material information provided orally shall be confirmed in permanent form.
5.4Communications shall include a comparison of results of calculations with the previous exercise carried out for the same purpose with an explanation of any differences (if one exists).
5.5Communications shall:
- indicate the nature and extent of any material uncertainty in the actuarial information they contain; and
- state the nature and significance of each material risk or uncertainty faced by the entity in relation to the technical actuarial work and explain the approach taken to the risk.
5.6Communications shall indicate any material changes or events that are known by a person responsible for the communication to have occurred since the effective date of the data and other information on which the technical actuarial work is based.
5.7If a person responsible for a component communication becomes aware of any evidence of that communication not being understood by any user, that person shall provide clarification or information to correct the misunderstanding.
5.8Communications shall not include information that is not material if it obscures material actuarial information.
Documentation
6Documentation shall contain enough detail for a technically competent person with no previous knowledge of the technical actuarial work to understand the matters involved and assess the judgements made.
Approved on 7 December 2016 Version 1.0 Effective from 1 July 2017
Financial Reporting Council 8th Floor 125 London Wall London EC2Y 5AS
+44 (0)20 7492 2300 www.frc.org.uk
-
The geographic scope of the FRC’s technical actuarial standards is limited to technical actuarial work done in relation to the UK operations of entities, as well as to any overseas operations which report into the UK, within the context of UK law or regulation (paragraph 5.5 of the Framework for FRC technical actuarial standards). ↩